The reason of UV flatbed printer head carriage is not controlled, this phenomenon is how to happen?
There are two states that the head carriage is uncontrolled:
One is the head carriage is not controlled when the device just started;The other one is the head carriage is not controlled when the printer is printing.
Reasons for uncontrolled when it starts:
1. There is a problem with the raster decoder;
2. There is a problem with the limit switch or the accessory.
Solution:
Carefully check the above parts, find the cause, you can choose to repair or replace to solve the problem.
Reasons for uncontrolled when it is printing:
1. There is a problem with the computer operating system, or poisoning, or there are errors and disorders in the program.
2. There is a problem with the control software on the board, the circuit burned and so on.
Solution:
1. If it is poisoning, you need a full anti-virus, then you can re-install the program software;
2. If there is a problem with the board, you need to replace the new board.