Some things to avoid when using UV flatbed printers are improper operations.We should avoid them to avoid damage to UV printers.
One.Things to avoid when using UV flatbed printers
1.Use poor quality cleaning fluid
Use inferior cleaning fluid to clean the nozzle.The nozzle is very easy to be contaminated and worn,so please use the product designated by the manufacturer and the product that has passed the quality inspection to clean the nozzle.
2,use poor quality ink
Add different batches of ink at will,or use inferior ink or cleaning fluid.The mixing of two different configurations of ink will change the color and quality of the ink,and the quality of the ink will affect the printing effect and block the nozzle,which will damage the life of the nozzle.
3.Switch the circuit at will
Install and disassemble the UV flat-panel printer circuit at will without turning off the power and turning off the main power.This behavior will damage the service life of each system and endanger the print head.
4,cleaning is not turned off the power
When cleaning,do not pay attention to protecting the circuit board and other internal systems.Please turn off the power when cleaning,and be careful not to let water touch the circuit board and other internal systems.
5,brute force adjustment nozzle
Use external force to adjust the nozzle position irregularly.Do not use brute force whether to replace or fine-tune the print head.Please treat the print head carefully according to the specifications.
6.Ignore the work ground
UV flatbed printer printing is greatly affected by static electricity,so you should always check the connection of the ground wire equipment,and regularly sprinkle a little salt water around the ground wire.
Two.UV printer manufacturer Dacen summary
This article is about"things to avoid when using UV flatbed printers".I hope to help you.