we use UV flatbed printer every day, But have we do the preparatory work well before turning on the printer? If the preparation work is not done well, and then repeated switching machine, will only increase the damage to the UV printer. So what do we need to do?
1. Inspection of key parts. In the UV printer preparation work, we inspect and lubricate bearing, guide rod and other parts of the printer, to reduce the resistance of the operation of equipment, to ensure the normal operation of the print job.
2. Do a clean job. Check the printer's nozzles, gratings, guides, etc., There are inevitably some dust and ink on these parts when printer work one day. These are needed to clean, timely cleaning in order to ensure the clarity of printed images.
3. Do check work well. Check whether the printer line connection is normal, the ink is enough to print the next work, whether there is waste ink, whether UV light is normal after turning on and so on. If there is an exception, we have to make timely adjustments.
4. Calibrating and testing. We need to calibrate the position of the printer before turning on, while making a test to see if the print results meet the requirements. If not, need to adjust.