UV flatbed printer is an industrial machine,which is relatively dry resistant,but good maintenance and good operation methods can increase the service life and printing effect of the UV printer.This article Dacen editor will talk about the operating precautions of the UV flatbed printer.
One,UV flatbed printer operation precautions
1.When the print head UV flatbed printer has a slightly longer working time,please pay attention to the temperature of the print head and ensure that the heat sink works normally.After all,but also very important,the grounding equipment of the UV flatbed printer is perfect.In the workshop,static electricity will be caused by the conflict of invisible air particles.Static electricity will cause great harm to the environment of various systems of UV flatbed printers.
2.We should pay attention to the selection of auxiliary parts for UV printers.The UV flatbed printer is exquisitely made and will not install a useless part.Therefore,do not disassemble any parts on the UV flatbed printer at will.Always check and strengthen the equipment of the UV flatbed printer parts,and don't let the data cable detach or loosen.Especially the air filters on the main ink tank and the auxiliary ink tank are easily mixed with various particles and dust,which will contaminate the ink and cause wear on the nozzle and nozzle parts.Some manufacturers'UV flatbed printers have ground wires and heat sinks on the nozzles.The grounding wire can effectively eliminate static electricity and prevent the nozzle from being worn or adsorbing dust.
3.We can start from the standard operation of UV printer nozzle.Although the operation method of the current UV printer has been simplified a lot,it is simply a computer software operation,the method is very easy,but in the operation,it is still not to be careless and operate at will.Since the UV printer is a very large machine,the internal system is very complicated.If the operation is not standard,or if the key is pressed repeatedly or multiple functions are operated in a short time,the UV printer will not be able to cope with it and cause problems such as crashes.These operations make the print head continue to be in the printing situation but not print work,and it is easy to wear the print head.In addition,we need to clean the print head before and after the UV printer's inkjet work.When cleaning,do not use general paper towels or cloth to wipe,otherwise it is very easy to infect the nozzles with dust and fibers,causing the nozzles to block.
Two,UV printer manufacturer Dacen summary
The above is the entire content of"Tip:UV Flatbed Printer Operation Precautions",I hope to help you.