How To Deal With The Ink Accumulation On The Nozzle Of The Bottle Printer?

- Mar 02, 2021-

   How to deal with the ink accumulation on the bottle printer nozzle? If the nozzle of the UV printer has not been cleaned for a long time, the cylindrical printer nozzle will be used for a long time, and it will be very easy to produce residue on the surface, which will cause ink accumulation and cause blockage. In this article, the Dacen editor will talk about how to solve it.


   One. How to deal with the ink accumulation on the nozzle of the cylindrical printer?


   1. The printing distance of the printer is too high and the ink floats.


   Each brand has different nozzle models, and its printable height is also different. Some nozzles have a printing height of 3 mm, and some have a printing height of 2 mm. At this time, the printing height of the lower bottle printer needs to be lowered.

cylinder UV printer

   2. Large amount of ink can cause ink accumulation.


   When the bottle UV printer chooses to print a pattern with a large amount of ink, a small amount of ink will accumulate on the surface of the nozzle. You can wipe it after the printing is completed and clean it.


   3. The bottle UV printer control software is lost.


  In this case, if you have a backup, you can directly restore it with one key. If you don't have it, you need to contact the manufacturer and just reinstall it.


   4. The ink dripping caused by the negative pressure of the cylindrical UV printer is too low.


   When the negative pressure of the cylindrical UV printer is too low, it will cause ink dripping of the nozzle. This is only necessary to adjust the negative pressure back to the normal range, but the software can also be manual. At the same time, it should be noted that the available negative pressure value of each manufacturer may be different and should be adjusted in accordance with the manufacturer's requirements.


   Two. Summary of the bottle printer manufacturer Dacen


   The above is "How to deal with the ink accumulation on the bottle printer nozzle?", I hope to help you. 


Previous:How To Prevent The Bottle Printer From Hitting Scrap Products? Next:What Are The Things To Avoid For Bottle Printers?