UV flatbed printer white ink particle how to solve?
UV flatbed printer white ink particle how to solve?In the use of tablet printer, may encounter this situation, DACEN on the combination of technology to give advice, put forward solutions, I hope to help you.
1. Curve problem
When the UV flatbed printer white ink particle sense of the situation appears, the general curve is a large point of the print curve.You can contact the manufacturer and send a small print curve, which can be replaced to solve the problem.
2. Quality problem of white UV ink itself
White UV ink itself compared to other pigment ink, due to the addition of titanium dioxide, the corresponding precipitation, ink impurities are larger.If the quality of the white UV ink itself is poor, on the one hand, it will accelerate the blocking process of the UV plate printer nozzle, shorten its service life, on the other hand in the printing
Process will appear in the sense of large particles, broken ink and so on.This will require you to contact the manufacturer and replace it with a higher quality UV ink.
3. Other solutions
If you are using a UV flatbed printer with its own ink stirring, you can start stirring for 5 minutes before printing.If there is no stirring, it must be done by hand.
The above is "UV flatbed printer white ink particle how to solve?"All content, when they will not solve the problem, in fact, very simple, directly dial the Dacen after-sales service telephone can, DACEN technology will solve the problem for you in time.