How to deal with the collision of UV flatbed printer?
How to deal with the collision of UV flatbed printer? A collision may damage the UV printer. This article will say that it really happened. How to deal with it?
1. How to deal with the collision of UV flatbed printer?
1. The UV printer car is equipped with a print head base plate with a fixed nozzle, and the print head is installed on the base plate, and UV lamps are installed on the upper and lower ends of the car. It is a common failure of the printer nozzle control loop. The second is the destruction of the mechanical parts of the printer nozzle. Then there is too much frictional resistance when the printer nozzle is working. During the long-term use of UV printers, more and more oil stains occur on the slide rails, which will prevent the printer nozzles from becoming more and more severe, which may cause the UV flatbed printer nozzles to crash. After all, it is due to the grease on the sliding rails that operate the printer nozzles and the dust in the air during the use of the UV flatbed printer. Long-term accumulation will cause the frictional resistance of the UV flatbed printer nozzles to increase when they move. Then when the frictional resistance is too large, it will cause the printer head to crash.
2. The UV lamp of general industrial production-level nozzle equipment (such as Ricoh nozzle) is equipped with a nozzle anti-skid device. When encountering a block higher than the copy plane, the car will automatically terminate and it is not easy to knock the nozzle down. However, some equipment is not easy to install this nozzle anti-skid equipment. Once the copy aspect ratio is adjusted to be smaller than the block aspect ratio, it may cause the car to crash. However, the upper and lower nozzles of some flatbed printers are generally equipped with anti-skid rain shields, even if they hit it, it is difficult to damage the nozzles.