Dacen's cylinder printer uses Ricoh G5i nozzles,which are industrial nozzles and have a long service life.This article will talk about how to deal with the clogging of the cylinder printer nozzles?
How to deal with the clogging of the cylinder printer nozzle?
A.How to deal with frequent nozzle clogging during printing
1.First press the PAUSE key to pause the printing job,and then press the PURGE key to move the machine head to the cleaning position at the left end.
2.Keep the cylinder printer power on,and unplug all the liquid level sensor signal wires connecting the auxiliary ink tank to the head control panel.
3.Unplug the ink supply tube(from the auxiliary ink tank)on the nozzle,and then use a glass syringe to draw a special cleaning solution to clean the nozzle.Method:Use 40ml cleaning solution every 10 minutes,3 to 4 times in total.
4.After cleaning,reconnect the ink supply tube and the liquid level sensor signal line,and then resume the previously suspended print job.
B.What to do if the nozzle is slightly clogged
1.During the printing process,if the nozzle is slightly clogged,press the PAUSE button to suspend the printing job without hesitation,and then use a vacuum cleaner or a manual air pump to eject the ink from the nozzle for nozzle cleaning.After cleaning,use a plastic squeeze bottle to the nozzle Spray some cleaning fluid on the surface to wash away residual ink.Note:Do not use excessive force when using a manual air pump,otherwise the nozzle will be damaged due to excessive pressure.
2.It is very important to deal with the slight clogging of the nozzle in a timely and decisive manner to keep the nozzle working during the long printing process!
3.In addition,carefully check the nozzle of the cylinder printer and find the cause of the nozzle clogging.
Summary of the cylinder UV printer manufacturer Dacen
This article is about"How to deal with the clogging of the cylinder printer nozzle?"I hope to help you.