How does UV flatbed printer deal with nozzle clogging?The specific measures to be taken when the nozzle clogging of the UV printer frequently occurs during the working process is:first suspend the printing work,and then move the UV printer head to the cleaning place at the initial position.After ensuring that the power supply of the equipment is turned on,unplug all the signal lines of the liquid level sensor connecting the auxiliary ink cartridge to the head control board.Because the UV printer is in the working process,due to the movement of the trolley and the internal circulation system,the data cable or the wire plug may be in poor contact or loose.Therefore,in daily work,pay attention to checking these parts regularly to avoid working errors in the UV printer.
One.How does the UV flatbed printer deal with the nozzle clogging problem?
1.When the UV printer nozzle is slightly clogged,the operator should immediately press the pause button to suspend printing,and then use a manual air pump or vacuum cleaner to suck out the ink from the nozzle.In addition,the nozzle can be cleaned by the flash spray function of the UV printer.After cleaning,use a plastic squeeze bottle to spray some cleaning fluid on the surface of the nozzle to wash away the remaining ink.During the operation,carefully check the condition of the nozzle of the UV printer and find the cause of the clogging of the nozzle.
2.Before the UV printer starts to work,pay attention to check the grounding device,eliminate static electricity,and keep the temperature and humidity in the working environment constant and moderate.Because static electricity can easily cause the print head to malfunction,the inkjet position is shifted,and the picture appears to be misaligned.
Two.UV printer manufacturer Dacen summary
The above is the whole content of"How does UV flatbed printer deal with nozzle clogging?",I hope to help you.