Reason and solution of the disconnection(2)

- Oct 20, 2017-

Eclosion disconnection: this is usually the white line that is arranged according to the direction of the print head. By the state of the print head,there can be observed that the stitching position is overlapped, spaced or the eclosion is poor. Disconnection like this only need to check and adjust the belt to make the UV flatbed printer run normally, and adjust the print head position of the spray point or adjust the eclosion can be solved. But it should be noticed that in the case of printing different grayscale images, the eclosion of the same handover position may be different.

Previous:Reason and solution of the disconnection(3) Next:Reason and solution of the disconnection(1)